Details of Award
NERC Reference : NE/T007826/1
Quantifying the Anisotropy of Poroelasticity in Stressed Rock
Grant Award
- Principal Investigator:
- Professor D Healy, University of Aberdeen, Sch of Geosciences
- Grant held at:
- University of Aberdeen, Sch of Geosciences
- Science Area:
- Earth
- Overall Classification:
- Panel A
- ENRIs:
- Environmental Risks and Hazards
- Natural Resource Management
- Science Topics:
- Crustal processes
- Faulting
- Geomechanics
- Geothermal energy
- Oil and gas
- Seismic waves
- Shale gas
- Earth Resources
- Earthquakes
- Faulting
- Risk management
- Seismic risk analysis
- Seismicity
- Tectonic systems
- Geohazards
- Properties Of Earth Materials
- Seismic hazards
- Tectonic modelling
- Tectonic Processes
- Earthquakes
- Abstract:
- Rocks in the upper crust of the Earth are often porous, with the pores and cracks filled with fluids like water, oil or gas. Forces acting on these rocks, arising from the weight of the overlying rocks and from plate tectonics, deform the grains and pores and cracks, changing their shape and volume. This deformation occurs before any fracturing or faulting, and is described by a theory called poroelasticity. This theory states that the orientations of the cracks and pores, where the pore fluid resides, exerts a major control on the response of the rock to stress. Fluid-filled parallel cracks occur in patterns around major earthquake prone faults, and these produce a much stronger response than random orientations of cracks or pores. Therefore, the poroelastic properties of rocks are important for our ability to forecast earthquakes on big faults and induced seismicity from human activities such as fluid injection in boreholes for CO2 sequestration or hydraulic fracturing (or 'fracking'). The poroelastic properties of rocks have been measured in the laboratory but all the data measured to date has been under a very special stress condition that probably does not exist in the Earth. Conventional triaxial stress (CTS) applies a vertical stress on a cylindrical rock sample, and then a constant pressure around the sides. We know that the stresses in the Earth vary in all directions, a condition known as true triaxial stress (TTS). And yet we have no poroelastic data from measurements under this stress state. A newly commissioned apparatus at UCL has been specifically designed to deform fluid saturated rock samples under true triaxial stresses and thus provide a unique and timely opportunity to address the core scientific issues: there are no published measurements of poroelastic coefficients measured under TTS and we urgently need better data to constrain better models of seismic hazard. Recent work by the investigators has shown that TTS produces significantly different patterns and densities of cracks in comparison to similar loading paths under CTS: TTS produces predominantly aligned parallel cracks, whereas CTS tends to produce radial cracks. We must systematically collect these data under the most likely in situ stress conditions within the crust - true triaxial stress - and we can use these new data to make tested, more robust, models of seismic hazard. Recent work has shown how important crack fabrics are for the fluid pressurisation, and potential weakening, of earthquake-prone faults. Arrays of fault parallel cracks around seismically active faults could produce a short-term fluid pressure change along the fault equal to the fault normal stress, allowing the fault to slip in an earthquake. This has potentially massive consequences assessing earthquake risk on major faults. Married with the increasing demand for accurate predictions of directional variations in stress and strain in the subsurface (e.g. deviated drilling for geothermal energy or hydraulic fracturing), this adds urgency to our rationale. We will produce open source software from our research, freely available to other scientists, engineers and the wider public. The first tool, currently being tested, will quantify the three-dimensional (3D) patterns of pores and cracks, including their orientations, sizes and shapes. The statistical distributions of these features will be quantified and used to help predict the poroelastic properties using the published theory. The second tool will use our newly measured poroelastic data to revise published models of earthquake triggering. The inclusion of poroelastic deformation in the current models is mixed with the frictional behaviour, but these are very different physical phenomena. Our new code will combine our previous work on the spatial variations of elastic properties around fault zones with the new laboratory measurements to make more robust forecasts of triggered earthquake hazard.
- Period of Award:
- 15 Feb 2021 - 14 Feb 2024
- Value:
- £283,073 Lead Split Award
Authorised funds only
- NERC Reference:
- NE/T007826/1
- Grant Stage:
- Completed
- Scheme:
- Standard Grant FEC
- Grant Status:
- Closed
- Programme:
- Standard Grant
This grant award has a total value of £283,073
FDAB - Financial Details (Award breakdown by headings)
| DI - Other Costs | Indirect - Indirect Costs | DA - Investigators | DI - Staff | DA - Estate Costs | DA - Other Directly Allocated | DI - T&S |
|---|---|---|---|---|---|---|
| £25,643 | £104,060 | £41,943 | £77,695 | £20,764 | £1,991 | £10,976 |
If you need further help, please read the user guide.