Details of Award
NERC Reference : NE/M021866/1
From evaluation to licencing of low-cost miniature conductivity temperature and dissolved oxygen sensor technology
Grant Award
- Principal Investigator:
- Professor M Mowlem, NOC (Up to 31.10.2019), Science and Technology
- Grant held at:
- NOC (Up to 31.10.2019), Science and Technology
- Science Area:
- Freshwater
- Marine
- Overall Classification:
- Unknown
- ENRIs:
- Environmental Risks and Hazards
- Global Change
- Natural Resource Management
- Pollution and Waste
- Science Topics:
- Analytical Science
- Environmental Sensors
- Instrumentation Eng. & Dev.
- Abstract:
- Measuring water parameters is required in many industries and in environmental science. The most widely measured and required parameters are temperature, salinity and dissolved oxygen. These measurements are used in multiple applications such as weather forcasting, climate modelling, water quality assessment, sewage processing and aquaculture. In many cases a high precision measurement and continuous data is required. Commercial sensors with high performance have delivered this data and have enabled dramatic advances in these fields. However, they are expensive (~$10000) and large preventing widespread use in high density data collection systems. Smaller and cheaper ($500) sensors are available, but currently are not sufficiently accurate or precise for many applications. The University of Southampton and the National Oceanography Centre have developed a unique ultra miniature high-precision salinity temperature and dissolved oxygen sensor for water analysis. These parameters are all measured on a small glass chip (8 x 10 mm) with patterned metal tracks to form the sensors. Salinity is calculated from a combination of temperature and conductivity measured with four micro electrodes in contact with the water. This chip is plugged into custom made electronics that operates the chip and stores the data and communicates with the outside world. The total sensor system is the size of a marker pen. The technology has significant market potential (estimated $420M at 2011 rates) and has received significant commercial interest. However, the current barrier to commercialisation is a technical problem with long term stability. This is only 0.016 C in three months, but many applications require only 0.001 C stability over 3 months. We have identified that the source of the problem as water uptake which causes swelling (1.6% by volume) of the polymer that we use to package and insulate the metal tracks. This swelling causes the chip and metal track sensors to bend or elongate over time causing the drift. This affects the temperature and conductivity measurement and hence the salinity accuracy. The solution is to replace the polymer insulator with a hard and water resistant material such as Silicon Oxide. Silicon oxide is widely used in electronics where very thin (100 nm, one ten thousandth of a millimetre) layers are deposited. In our chip we require a much thicker layer > 0.01 mm. The challenge is to develop a process to manufacture these thick layers and new sensor chips. Once this technical problem is resolved, we will conduct short and long term testing to verify sufficient performance for the markets and applications. We will do this in partnership with sensor companies who we hope to work with to bring the product to market. The outcome of the project should be a license agreement with a company and a new product line.
- Period of Award:
- 1 Jul 2015 - 30 Jun 2017
- Value:
- £122,739 Lead Split Award
Authorised funds only
- NERC Reference:
- NE/M021866/1
- Grant Stage:
- Completed
- Scheme:
- Innovation
- Grant Status:
- Closed
- Programme:
- Follow on Fund
This grant award has a total value of £122,739
FDAB - Financial Details (Award breakdown by headings)
| DI - Other Costs | Indirect - Indirect Costs | DA - Investigators | DA - Estate Costs | DI - Staff | DI - T&S |
|---|---|---|---|---|---|
| £28,341 | £34,094 | £6,363 | £13,604 | £31,835 | £8,503 |
If you need further help, please read the user guide.