Skip to content
Natural Environment Research Council
Grants on the Web - Return to homepage Logo

Details of Award

NERC Reference : NE/M021513/1

Microscale devices for detection of key pollutants in the built environment

Grant Award

Principal Investigator:
Professor A Lewis, University of York, Chemistry
Co-Investigator:
Professor LJ Carpenter, University of York, Chemistry
Science Area:
Atmospheric
Terrestrial
Overall Classification:
Unknown
ENRIs:
Environmental Risks and Hazards
Pollution and Waste
Science Topics:
Gas Chromatography
Mass Spectrometry
Analytical Science
Environmental Sensors
Instrumentation Eng. & Dev.
Design for Health (Buildings)
Air Quality (indoors)
Building Ops & Management
Materials testing & eng.
Sensor Integration
Instrumentation Eng. & Dev.
Abstract:
Polar volatile organic compounds (pVOC) have a profound impact on the functioning of the atmosphere and many are also toxic airborne pollutants. They are however very difficult to measure, being sticky, reactive and in some cases thermally unstable. These same species are also very significant in the built environment, negatively influencing indoor air quality, malodours, human health and contributing to costly effects such as sick building syndrome. Through previous NERC support we developed a unique microfluidic approach to measuring trace levels of pVOCs in the atmosphere. We achieved this using a novel lab-on-a-chip technology that allows for a highly efficient chemical derivatization of pVOCs in the gas phase, which in simple terms converts the target molecules into more stable forms that are much easier to detect. Once derivatised, pVOCs can then be measured using common analytical techniques such as gas chromatography and mass spectrometry, instruments that are found in most modern chemical laboratories. The key to our new technology is a micro-reactor that integrates together three laboratory functions: (1) a gas and liquid mixer and reactor, where derivatization takes place, (2) controlled reagent heating to speed up the analysis, and (3) sample pre-concentration to enable lower detection limits. The output from the micro-reactor is a microlitre effluent stream of processed sample that has stripped the pVOCs from the gas phase into a stable and highly concentrated liquid form, and that is ready for direct introduction to Gas Chromatography-Mass Spectrometry (GC-MS) or other technique. The micro-reactor can be completely automated and provides a highly effective solution to an otherwise multi-step, manual analytical procedure by providing a fast and highly efficient derivatization reaction at elevated temperatures, and using very low chemical volumes The assessment of pVOCs in the gas phase in the built environment is a widespread problem with significant economic impacts, and for which here are few effective technical solutions. These chemicals are emitted from furniture, carpets, paints and building construction materials in general and there have been significant new regulatory requirements introduced in the EU, USA and China in recent years that have created a major but as yet unmet demand for simple and efficient measurement methods. Any product sold for the built environment in the EU must comply with the very recent 2013 Construction Productn Regulation Directives before it can be put on sale and a supplier must demonstrate this either by testing their products in-house, or outsourcing the analysis to third-party laboratories. Our proposed innovation for follow-on funding is therefore to take a technology developed for a niche area of atmospheric chemistry and translate this into a urgently required turn-key sample preparative product for the analytical industries associated with gaseous emissions materials testing and the built environment. We plan to complete the technical implementation of a fully functional prototype device and work with commercial partners to develop demonstration activities for particular industriesWe identify that the global market for such specialised analytical devices is relatively modest (measured in hundreds to low thousands of units), but that the improved lower-cost testing leads to improved product competitiveness, with much wider economic impacts . The societal and economic impact of the innovation should therefore be viewed more widely than simply the commercial revenue that might be obtained from device sales alone.
Period of Award:
1 Jun 2015 - 31 May 2016
Value:
£98,810
Authorised funds only
NERC Reference:
NE/M021513/1
Grant Stage:
Completed
Scheme:
Innovation
Grant Status:
Closed
Programme:
Follow on Fund

This grant award has a total value of £98,810  

top of page


FDAB - Financial Details (Award breakdown by headings)

DI - Other CostsIndirect - Indirect CostsDA - InvestigatorsDA - Estate CostsDI - T&SDA - Other Directly Allocated
£16,129£28,184£4,807£13,237£4,032£32,421

If you need further help, please read the user guide.